
Tungsten heavy alloy round bar DensM® 170
Round bar in DensM® 170 tungsten heavy alloy: 90 % tungsten with NiFe binder, density 17.0 g/cm³, to ASTM B777 Class 1.
28,08 € incl. 19% German VAT / pcs
Available from stock
Request a written quoteMain price net, plus VAT. Purchase on invoice after registration.
All sizes and prices
- 0,08 kg · 295 €/kgIn stock23,60 € / pcs
- 0,21 kg · 295 €/kgIn stock61,95 € / pcs
- 0,36 kg · 295 €/kgIn stock106,20 € / pcs
- 0,69 kg · 286 €/kgIn stock197,34 € / pcs
- 0,38 kg · 286 €/kgLead time 5 weeks108,68 € / pcs
- 0,96 kg · 286 €/kgIn stock274,56 € / pcs
- 0,84 kg · 286 €/kgIn stock240,24 € / pcs
- 0,99 kg · 286 €/kgLead time 5 weeks283,14 € / pcs
- 1,29 kg · 286 €/kgIn stock368,94 € / pcs
- 0,13 kg · 286 €/kgIn stock37,47 € / pcs
Material info
Key properties
- Composition: 90.0–90.5 % W, balance Ni+Fe
- Density: 16.9–17.15 g/cm³ (typical 17.0)
- Tensile strength: 770–1000 MPa, elongation 5–30 %
- Hardness: 280–320 HV10
- Young's modulus: 320–340 GPa
- Thermal conductivity: 97–103 W/mK
- Slightly magnetic (NiFe binder)
Applications
- Radiation shielding, e.g. in medical diagnostics and radiotherapy
- Mass balancing in rotating systems (avionics, radar, crankshafts)
- Tool holders and high-speed spindles
- Die-casting moulds for aluminium, magnesium, zinc and copper
- Hot upsetting tools
Show technical notesHide technical notes
Complies with ASTM B777 (Class 1). Inspection document to EN 10204 – test report 2.2 or inspection certificate 3.1 – on request. Non-magnetic grade DensM® 170 P with NiCu binder available on request.
Technical data
- Article no.
- R-D170-4.5x300
- Material
- DensM170
- Diameter
- 4.5 mm
- Length
- 300 mm
Datasheets
Description
DensM® 170 is a tungsten heavy alloy (WNiFe) made by powder metallurgy: tungsten powder is blended with nickel and iron, pressed, sintered and heat-treated. The microstructure consists of spherical tungsten grains in a tough NiFe binder phase. The material thus combines a density of around 17 g/cm³ with good toughness and is considerably easier to machine than pure tungsten.