Tungsten heavy alloy round bar DensM® 175

Tungsten heavy alloy round bar DensM® 175

Round bar in DensM® 175 tungsten heavy alloy: 92.5 % tungsten with NiFe binder, density 17.5 g/cm³, to ASTM B777 Class 2.

Article numberR-D175-46.2x100
834,96 €netto / pcs

993,60 € incl. 19% German VAT / pcs

In stock

Available from stock

Request a written quote

Main price net, plus VAT. Purchase on invoice after registration.

All sizes and prices

38 sizes
  • 0,21 kg · 303 €/kg
    Lead time 5 weeks
    63,63 € / pcs
  • 0,29 kg · 303 €/kg
    Lead time 5 weeks
    87,87 € / pcs
  • 0,37 kg · 303 €/kg
    Lead time 5 weeks
    112,11 € / pcs
  • 0,47 kg · 303 €/kg
    Lead time 5 weeks
    142,41 € / pcs
  • 0,72 kg · 289 €/kg
    Lead time 5 weeks
    208,08 € / pcs
  • 0,86 kg · 289 €/kg
    Lead time 5 weeks
    248,54 € / pcs
  • 1,02 kg · 289 €/kg
    Lead time 5 weeks
    294,78 € / pcs
  • 1,56 kg · 289 €/kg
    Lead time 5 weeks
    450,84 € / pcs
  • 2,06 kg · 289 €/kg
    Lead time 5 weeks
    595,34 € / pcs
  • 2,34 kg · 289 €/kg
    Lead time 5 weeks
    676,26 € / pcs

Material info

Key properties

  • Composition: 92.5–93.0 % W, balance Ni+Fe
  • Density: 17.3–17.7 g/cm³ (typical 17.5)
  • Tensile strength: 760–980 MPa, elongation 5–30 %
  • Hardness: 300–330 HV10
  • Young's modulus: 340–360 GPa
  • Thermal conductivity: 107–113 W/mK
  • Slightly magnetic (NiFe binder)

Applications

  • Radiation shielding, e.g. in medical diagnostics and radiotherapy
  • Mass balancing in rotating systems (avionics, radar, crankshafts)
  • Tool holders and high-speed spindles
  • Die-casting moulds for aluminium, magnesium, zinc and copper
  • Hot upsetting tools
Show technical notes

Complies with ASTM B777 (Class 2). Inspection document to EN 10204 – test report 2.2 or inspection certificate 3.1 – on request. Non-magnetic grade DensM® 175 P with NiCu binder available on request.

Technical data

Article no.
R-D175-46.2x100
Material
DensM175
Diameter
46.2 mm
Length
100 mm

Description

DensM® 175 is a tungsten heavy alloy (WNiFe) made by powder metallurgy: tungsten powder is blended with nickel and iron, pressed, sintered and heat-treated. The microstructure consists of spherical tungsten grains in a tough NiFe binder phase. The material thus combines a density of around 17.5 g/cm³ with good toughness and is considerably easier to machine than pure tungsten. Compared with DensM® 170, DensM® 175 contains more tungsten and less binder – density, hardness and stiffness are higher.