
Tungsten heavy alloy round bar DensM® 175
Round bar in DensM® 175 tungsten heavy alloy: 92.5 % tungsten with NiFe binder, density 17.5 g/cm³, to ASTM B777 Class 2.
993,60 € incl. 19% German VAT / pcs
Available from stock
Request a written quoteMain price net, plus VAT. Purchase on invoice after registration.
All sizes and prices
- 0,21 kg · 303 €/kgLead time 5 weeks63,63 € / pcs
- 0,29 kg · 303 €/kgLead time 5 weeks87,87 € / pcs
- 0,37 kg · 303 €/kgLead time 5 weeks112,11 € / pcs
- 0,47 kg · 303 €/kgLead time 5 weeks142,41 € / pcs
- 0,72 kg · 289 €/kgLead time 5 weeks208,08 € / pcs
- 0,86 kg · 289 €/kgLead time 5 weeks248,54 € / pcs
- 1,02 kg · 289 €/kgLead time 5 weeks294,78 € / pcs
- 1,56 kg · 289 €/kgLead time 5 weeks450,84 € / pcs
- 2,06 kg · 289 €/kgLead time 5 weeks595,34 € / pcs
- 2,34 kg · 289 €/kgLead time 5 weeks676,26 € / pcs
Material info
Key properties
- Composition: 92.5–93.0 % W, balance Ni+Fe
- Density: 17.3–17.7 g/cm³ (typical 17.5)
- Tensile strength: 760–980 MPa, elongation 5–30 %
- Hardness: 300–330 HV10
- Young's modulus: 340–360 GPa
- Thermal conductivity: 107–113 W/mK
- Slightly magnetic (NiFe binder)
Applications
- Radiation shielding, e.g. in medical diagnostics and radiotherapy
- Mass balancing in rotating systems (avionics, radar, crankshafts)
- Tool holders and high-speed spindles
- Die-casting moulds for aluminium, magnesium, zinc and copper
- Hot upsetting tools
Show technical notesHide technical notes
Complies with ASTM B777 (Class 2). Inspection document to EN 10204 – test report 2.2 or inspection certificate 3.1 – on request. Non-magnetic grade DensM® 175 P with NiCu binder available on request.
Technical data
- Article no.
- R-D175-46.2x100
- Material
- DensM175
- Diameter
- 46.2 mm
- Length
- 100 mm
Datasheets
Description
DensM® 175 is a tungsten heavy alloy (WNiFe) made by powder metallurgy: tungsten powder is blended with nickel and iron, pressed, sintered and heat-treated. The microstructure consists of spherical tungsten grains in a tough NiFe binder phase. The material thus combines a density of around 17.5 g/cm³ with good toughness and is considerably easier to machine than pure tungsten. Compared with DensM® 170, DensM® 175 contains more tungsten and less binder – density, hardness and stiffness are higher.